| PHASE 7 - Production Ramp-up |
{Manage supply chain, QC, and production in order to scale up production to desired volume.}
The product design and production processes are completed and validated at this point. Thus, all EG requirements will have been determined, designed, implemented and validated as well.
The manufacturer and recycling partners will require specific lifecycle information for the product; e.g., what components / materials can be reused / reclaimed and what percentage is required; records of the weight and quantity of product placed on various markets each year. Also, specific processes for the treatment or disposal of residual waste must be made available to the recycling partners.
And again, continue to look for improvements in the processes by empowering the people who actually do the work.
Waste
Support the ramp-up operation while constantly measuring any deviations form the designed EG (and other) goals. Correct as necessary.
Consumer / Environmental health
Support the ramp-up operation while constantly measuring any deviations form the designed EG (and other) goals. Correct as necessary.
Limited resources & energy
Support the ramp-up operation while constantly measuring any deviations form the designed EG (and other) goals. Correct as necessary.
Product safety & liability
Support the ramp-up operation while constantly measuring any deviations form the designed EG (and other) goals. Correct as necessary.
|
JUMP TO PAGE
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
©2005, Richard M. Haney
|
